Industry Information

Load factor of reducerThe reducer must not be overloaded during use, otherwise it will affect its normal use and may shorten its service life. In order to be able to bring good use effect. The following content will make a detailed explanation for its load factor: 　　1, dynamic load. The coefficient of additional dynamic load […]

Prevent the reducer from scratchingWe must not only learn to use the reducer but also learn to maintain the equipment. In case of a small scratch on this equipment, it will not only affect the normal control speed of the equipment but also affect the appearance. Although it is said that polishing can be done

What are the main parts of the reducerMany times to judge the operation of a device, it mainly depends on the operation speed of the device. For the operation of the device, the speed is one of the reference data. What parts are needed during the use of the reducer? 　　1, box body and lid

Analyze the transmission efficiency of the reducerThe speed reducer can reduce the speed. Generally speaking, many equipments have a high speed when they are running. Although a high speed can complete a certain function in a short time, the high speed can also cause many hidden dangers. Therefore, some reduction equipment is needed To control

Reducer oil level detectionEvery time we use the reducer, we will check whether the lubricating oil has been added enough, and only after it has been added can we start using the equipment to control the speed. In fact, we can roughly know how much oil has been added through oil level detection. Is it

How to improve the heat dissipation efficiency of the reducerThe reducer will generate some heat during operation. If it is not radiated in time, it will have a bad effect on the body. Therefore, timely heat dissipation is required. Timely heat dissipation can avoid some circuit overheating problems and protect the safety of the fuselage.

How to improve the carrying capacity of the reducerThe speed reducer has a strong ability to control the speed, and we should make full use of its advantages in all aspects when using it. Improving its carrying capacity in practical applications can effectively improve its use efficiency. If the bearing capacity is strong, the pressure

How to solve the oil leakage of the reducerAfter using the reducer for a long time, a comprehensive inspection should be carried out so that we can find some hidden dangers in time. In order to make the equipment run efficiently, we generally refuel in time. But we should also solve the oil spill problem

How to choose the lubricating oil viscosity of the reducerWe usually inject a certain amount of lubricating oil into the machine before using the reducer. The injected lubricating oil has very strict requirements for viscosity. Therefore, viscosity is an important physical and chemical index of gear oil. The viscosity of the oil is selected correctly.

Common faults and troubleshooting methods of reducerAs the reducer is often used in metallurgy, mining, chemical and other fields, affected by its working environment, machinery often has various failures during use. The common failures of the machine and the corresponding solutions are described in detail below.  The frequent failures during the use of the reducer