Precision Adjustment of Planetary Reducer
When there is movement, there is friction, and when there is friction, it will cause changes in the size, shape and surface quality of related parts, resulting in wear and increasing the gap between related parts. When the gap exceeds reasonable range, only by adjusting the gap can the accuracy of the relative movement between the parts be ensured. Now, CAMEL engineer will share with you how to make precision adjustment to planetary reducer.
1. Adjustment of guide rail accuracy
For ordinary mechanical equipment, to judge whether the gap between the sliding guide rails is suitable, usually use 0.03mm or 0.04mm thick feeler gauge to insert into the end surface for inspection, and the insertion depth should be less than 20mm. If the guide rail gap is not suitable, it must be adjusted in time.
2. Adjustment of the gap between screw and nut
How can the development of planetary reducers meet industry demand?
How can the development of planetary reducers meet industry demand?
Screw nut drive is common mechanism to realize linear motion. It is difficult to achieve 0 clearance for this screw nut type. Especially after a period of use, the gap will increase due to wear, which will affect the normal operation of the equipment. Therefore, during equipment maintenance, it is very necessary to eliminate the gap between the lead screw and the nut.
3. Adjustment of the rotation accuracy of the main shaft of the planetary reducer
Generally speaking, on the premise that the machining error of the spindle itself meets the requirements, the rotation accuracy of the planetary reducer spindle is largely determined by the bearing. The key to adjusting the rotation accuracy of the spindle is to adjust the bearing clearance and maintain reasonable value. This has great significance to the working performance of the spindle components and the lifespan of the bearing.
For rolling bearings, working with a large gap will not only concentrate the load on the rolling element in the force direction, but also cause serious stress concentration at the contact between the inner and outer ring raceways of the bearing to shorten the bearing life, but also cause the drift of the spindle center line, which is easy to cause the vibration of the spindle components. Therefore, the adjustment of the rolling bearing must be pre-loaded to generate certain interference inside the bearing, causing certain elastic deformation at the contact between the rolling element and the inner and outer ring raceways to improve the rigidity of the bearing.
CAMEL Transmission Machinery Factory is a professional supplier,distributor and manufacturer of gear reducers and related accesories. including rotary reducer,worm gearbox, servo-gearbox, planetary gearboxes,planetary gear reducer, helical gear reducers,planetary gearbox,right angle gear reducer, gear reduction,gear motors, electrical motors,DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,servomotor, bearings, spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.If you have any need, please feel free to contact CAMEL:
Whatsapp:8618015057952
